Gun Test: Ruger LCP II Lite Rack

The popularity of small-caliber pistols in .25 ACP and .32 ACP cameras has declined significantly in recent years due to the ever-increasing selection of submachine gun models designed for larger cartridges, including the 9mm Luger and .380 ACP-a. the transition, which was partly due to the release of the 2008 Lightweight Compact Ruger’s pistol (LCP). This one-time semi-automatic, which is rated at .380 ACP, received various upgrades in 2016, resulting in the release of LCP II, which remains the best seller for the company to date.

Although the 9mm pocket gun has gained popularity, there is a “mouse pistol” cartridge that has not yet gone out of fashion, the .22 rifle. Although this beloved fire does not deliver the optimal level of power cut, the cartridge is still ubiquitous, much cheaper than its firearm counterparts. But the most striking feature is its low level of felt return, which produces it in small pistols, and shooting during operation is easy and pleasant.

The LCP II Lite rack is distributed by a removable pin. A spring-loaded spring is mounted on a single-piece steel guide rod. Notice the contour of the barrel cap and its bell hair.

Given that the devotees of the LCP II platform were looking for a cheaper means of practice in the series and a familiar platform for casual concealment, Rüger acquired a new gun in 2020. In addition to the low-level back-to-back production, this model has a slide that makes manual rotation easier and has two safety features not found in the .380 ACP versions.

Like the center fire option, the LCP II Lite Rack is a hammer; however, it differs in that it works with pressure. The exterior and footprint features are roughly similar to the center fire models, but this means that it is compatible with a variety of existing sheaths and transmission systems. The hardened and blue-clad steel slides create a stable landscape in the form of slides and angular slides in front and back. The 2.75 barrel stainless steel barrel has six recesses, 1:16 if the right hand rifle and the contour are cut to the top edges and side of the hood. The complete carbon guide rod is made of carbon steel with a round wire return spring.


The Rimfire LCP II Lite Rack is an internal design of the hammer in which the hammer itself is fully enclosed. Notice the inseparable landscape.

The slide is supported by a pair of 3.3 ″ rails in a molten aluminum chassis, which also includes a trigger group and top control. The interior chassis is blacked out into a glass-filled frame. The frame cover is rounded, while the trigger guard is woven with a flat front face and is square as a finger rest. In the frame of the panel there are panels of stable fabric and mold on four sides.

Hide the gun removal is located on the left side of the frame and along with the slide and release the magazine. The hunter locks the slide when opening the last shot, and the release button of the metal magazine is located behind the trigger guard for easy access with the finger of the shooter. This model comes with a one-piece, 10-inch, steel magazine that is possible through a slightly expanded plate.

Two safety features have been added to this pistol that are not available in the .380 ACP. Directly behind the slide catch is a metal safety lever located on the left side of the frame. Instead of moving up and down like many pistols, it goes straight back to safe mode. Pressing it into the fire mode makes a dot clearly visible and red in the frame. The safety lever is small, flawless and easy to maneuver. This gun also has a magazine split; when the magazine is removed from the claw, the trigger is closed to prevent the gun from slipping.

When using a rimfire pistol as a defensive pistol, it is important that the pistol provides a comparable sight and traction. Some sniper rifles don’t replicate these features enough for useful training, but the Rack Lite successfully replicates the set scenes and makes the .380 model work. All LCP II pistols, including this pistol, use a safe and secure Ruger trigger.

The polymer trigger has a smooth and clean feel with a short resurfacing. Start a tested gun 5 lbs., 4 ozs. using the Lyman digital trigger indicator. The overall compatibility and completion of the Lite Rack is similar to other LCP II options, up to Ruger standards worldwide. The only significant difference when firing this pistol is the increased number of turns in the magazine and the reduced return.

Small rimfire pistols, like these, are notorious for their unreliability. The reason for this is the variety of .22 Rifle Long rifle weights, speeds and brands of ammunition. Note that this is a cartridge for a rifle designed for tanks 16 16 and longer; the barrel lengths of the gun do not only provide the burning time for the gunpowder powders used by these cartridges.


According to Ruger, the optimal versions of ammunition for the LCP II Lite Rack have high-speed loads, up to 40-g. arrows. A more expensive load of hyper-speed will work, but less at the expense of additional costs on the speed road. Cartridges with lighter bullets or slower muzzle speeds, such as a 36-gr. the load is used for an accurate formal test – it can rotate the slide, but determining which solar loads are constantly working on your gun takes time to test each of them. The LCP II tested for this review was very reliable using three 10-cycle factory logs. It experienced one meal in the first 100 rounds, but otherwise worked without any other problems for hundreds of rounds of shooting.

The LCP II Lite Rack is clearly designed to serve as a tutorial for the .380 ACP version. It fills this space with easy controls for maneuverability, a low level of return, and low cost of ammunition. But this little gun is certainly not limited to just a paper punch in a rectangular frame. Its heavy size and light weight – combined with the proposed retail price of $ 349 or real world prices of around $ 300, make it an ideal outdoor gun and a useful choice for pest control from close range.

blank | Gun Test: Ruger LCP II Lite Rack


Inter Reviewed is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – The content will be deleted within 24 hours.

Related Articles

Back to top button